Origins of Boosted Charge Storage on Heteroatom-Doped Carbons

Although tremendous efforts have been devoted to understanding the origin of boosted charge storage on heteroatom-doped carbons, none of the present studies has shown a whole landscape. Herein, by both experimental evidence and theoretical simulation, it is demonstrated that heteroatom doping not only results in a broadened operating voltage, but also successfully promotes the specific capacitance in aqueous supercapacitors. In particular, the electrolyte cations adsorbed on heteroatom-doped carbon can effectively inhibit hydrogen evolution reaction, a key step of water decomposition during the charging process, which broadens the voltage window of aqueous electrolytes even beyond the thermodynamic limit of water (1.23 V). Furthermore, the reduced adsorption energy of heteroatom-doped carbon consequently leads to more stored cations on the heteroatom-doped carbon surface, thus yielding a boosted charge storage performance.     

砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

Nb(iPrNPMe2)3Fe–PMe3: A potential high reactivity heterobimetallic catalyst for acetylene cycloadditions

Alkynes cycloaddition reactions are powerful tools for constructing cyclic molecules with optimal atom efficiency, but these reactions cannot proceed at ambient temperature without transition-metal catalysts. In this work, a heterobimetallic complex featuring an Nb–Fe triple bond, Nb(ⁱPrNPMe₂)₃Fe–PMe₃, has been evaluated as the potential catalyst for acetylene cycloaddition, using density functional theory. The calculated results show that the singlet-state (i.e. ground-state) Nb(ⁱPrNPMe₂)₃Fe–PMe₃ can be applied to benzene synthesis, but is not suitable for cyclobutadiene. Benzene can be obtained easily at room temperature and is the unique product on the singlet potential surface. The irradiation of infrared-red light can drive the excitation of singlet Nb(ⁱPrNPMe₂)₃Fe–PMe₃ to its triplet state. Both benzene and cyclobutadiene can be formed on the triplet reaction potential surface due to their low energy barriers. Therefore, Nb(ⁱPrNPMe₂)₃Fe–PMe₃ is a potential high reactivity heterobimetallic catalyst for the cyclotrimerization of alkynes. In the reaction process, the catalytic active site of Nb(ⁱPrNPMe₂)₃Fe–PMe₃ moves from niobium to iron.     

Ag+掺杂的立方相Y2O3:Eu纳米晶体粉末发光强度研究

采用化学自燃烧法制备了不同Ag⁺掺杂浓度的Y₂O₃:Eu纳米晶体粉末样品(［Y³⁺］∶［Eu³⁺］∶［Ag⁺］=99∶1∶X，X=0—3.5×10^-2)，以及通过退火处理得到了相应的体材料.根据X射线衍射谱确定所得纳米和体材料样品均为纯立方相.实验表明在纳米尺寸样品中随着Ag离子浓度的增加，荧光发射强度随之增加，当X=2×10^-2时达到最大值，其发光强度比X=0时提高了近50%.当Ag离子浓度继续增加，样品发光强度保持不变.在相应的体材料样品中则没有观察到此现象.通过对各样品的发射光谱，激发光谱，X射线衍射图谱，透射电镜(TEM)照片和荧光衰减曲线的研究，分析了引起纳米样品荧光强度变化的原因是由于Ag离子与表面悬键氧结合，从而使这一无辐射通道阻断，使发光中心Eu³⁺的量子效率提高；Ag⁺的引入所带来的另一个效应是使激发更为有效.这两方面原因使发光效率得到了提高.     

识别过渡金属离子的1,8-萘二甲酰亚胺多胺衍生物荧光传感器的研究

设计合成了用以检测过渡金属离子的荧光化学敏感器体系,它们是由1,8-萘二酰亚胺为荧光团,多胺衍生物为金属离子受体组成．在室温下对其光物理性质的研究中发现,在没有加入过渡金属离子时,由于体系内存在有效的光诱导电子转移过程使得荧光团的荧光被淬灭．加入过渡金属离子后,金属离子受体中的氮原子和过渡金属离子之间的配位作用阻断了光诱导电子转移过程,体系的荧光增强．不同的金属离子受体表现出了和过渡金属离子不同的配位识别能力,并且通过荧光的变化传递出受体-金属离子作用的信息．     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

超声光栅实验及其多普勒频移的一种简单研究方法

采用光子学方法,对超声光栅衍射实验和实验中出现的多普勒频移现象进行了研究,所得结论与采用光的波动性观点的惠更斯-菲涅耳原理及傅里叶变换等常规方法相同.该方法进一步加深了对衍射的本质和光的粒子性的理解并对光子的信息传递能力有初步的认识.     

静态球对称黑洞Dirac场的统计熵

利用改进的brickwall模型,给出了一类静态球对称黑洞Dirac场的熵,结果表明,在取相同的截断因子时,Dirac场的熵均为标量场的熵的72倍 关键词： 黑洞 统计熵 brickwall模型 Dirac场     

双向分束角对称的偏光分束镜设计与性能分析

为了获得分束角对称的偏光分束棱镜，在双Wollaston棱镜结构的基础上，通过合理设计棱镜左右两端晶体光轴的取向，使棱镜整体呈中心切面对称；在保证对正向入射的光对称分束的同时，对反向入射光同样可以对称分束，达到了双向对称分束的目的；在此基础上给出了晶体光轴的旋转角δ与棱镜结构角S以及与波长的关系；并分析了对633 nm设计的棱镜用于其他波长时分束角的对称性.结果表明：在±300 nm的光谱范围内，分束角的不对称度均小于0.24°.     

利用CCD光电测量系统测量杨氏弹性模量

提出一种测量微小伸长量的光电测量方法,即利用CCD光电测量系统将单缝衍射的光强分布转换为电信号,经过计算机处理后输出光强分布曲线,从相邻波谷读出衍射条纹间隔,通过软件的简单操作直接输出测量结果.实现了数据采集及运算结果的实时化、半自动化,并克服了传统方法的测量困难和数据处理的复杂计算.利用这一方法测定了钢丝的杨氏弹性模量,与标称值符合得较好.